HPE FlexNetwork MSR Series

122
1. Configure Router A:
# Create Virtual-Template 1 for PPPoFR and bind it to the MP template Virtual-Template 3.
<RouterA> system-view
[RouterA] interface virtual-template 1
[RouterA-Virtual-Template1] ppp mp virtual-template 3
[RouterA-Virtual-Template1] quit
# Create Virtual-Template 2 for PPPoFR and bind it to the MP template Virtual-Template 3.
[RouterA] interface virtual-template 2
[RouterA-Virtual-Template2] ppp mp virtual-template 3
[RouterA-Virtual-Template2] quit
# Create and configure Virtual-Template 3.
[RouterA] interface virtual-template 3
[RouterA-Virtual-Template3] ppp mp lfi
[RouterA-Virtual-Template3] qos max-bandwidth 64
[RouterA-Virtual-Template3] ip address 1.1.6.1 255.255.255.0
# Map DLCI 100 to Virtual-Template 1 and DLCI 200 to Virtual-Template 2 for PPPoFR on the
frame relay interface Serial 2/0.
[RouterA] interface serial 2/0
[RouterA-Serial2/0] fr dlci 100
[RouterA-fr-dlci-Serial2/0-100] quit
[RouterA-Serial2/0] fr map ppp 100 interface virtual-template 1
[RouterA-Serial2/0] fr dlci 200
[RouterA-fr-dlci-Serial2/0-200] quit
[RouterA-Serial2/0] fr map ppp 200 interface virtual-template 2
2. Configure Router B:
# Create Virtual-Template 1 for PPPoFR and bind it to the MP template Virtual-Template 3.
<RouterB> system-view
[RouterB] interface Virtual-Template 1
[RouterB-Virtual-Template1] ppp mp virtual-template 3
[RouterB-Virtual-Template1] quit
# Create Virtual-Template 2 for PPPoFR and bind it to the MP template Virtual-Template 3.
[RouterB] interface Virtual-Template 2
[RouterB-Virtual-Template2] ppp mp virtual-template 3
[RouterB-Virtual-Template2] quit
# Create and configure Virtual-Template 3.
[RouterB] interface Virtual-Template 3
[RouterB-Virtual-Template3] ppp mp lfi
[RouterB-Virtual-Template3] qos max-bandwidth 64
[RouterB-Virtual-Template3] ip address 1.1.6.2 255.255.255.0
# Map DLCI 100 to Virtual-Template 1 and DLCI 200 to Virtual-Template 2 for PPPoFR on the
frame relay interface Serial 2/0.
[RouterB] interface serial 2/0
[RouterB-Serial2/0] fr dlci 100
[RouterB-fr-dlci-Serial2/0-100] quit
[RouterB-Serial2/0] fr map ppp 100 interface virtual-template 1
[RouterB-Serial2/0] fr dlci 200
[RouterB-fr-dlci-Serial2/0-200] quit
[RouterB-Serial2/0] fr map ppp 200 interface virtual-template 2