HPE FlexNetwork MSR Series Comware 5 Layer 2 - Wan Access Configuration Guide

140
Step Command Remarks
2. Enter dialer interface
(physical or dialer interface)
view.
interface
interface-type
interface-number
N/A
3. Enable PPP encapsulation.
link-protocol ppp
N/A
4. Configure authentication
parameters.
See "Configuring PPP and MP." N/A
5. Enable PPP callback client.
ppp callback client
By default, PPP callback client is
disabled.
6. Configure the dial string for a
Windows NT Server to call
back.
ppp callback ntstring
dial-number
Optional.
By default, no dial string is
configured for a Windows NT
Server to call back.
Configure this command if a
Windows NT Server requires PPP
callback clients to send callback
numbers.
7. Set the interval for DCC to
make the next call attempt.
dialer timer enable
seconds
Optional.
Hewlett Packard Enterprise
recommends that you use 15
seconds.
Configuring a PPP callback server in the C-DCC implementation
As a callback server, your router can place return calls according to network addresses configured
with the dialer route command (PPP authentication must be configured in this case), or according to
the PPP callback numbers. You must select either approach with the dialer callback-center
command.
Configure callback client usernames with the dialer route command, so the callback server can
authenticate whether a callback client is valid when receiving a call from it.
To configure a PPP callback server in the C-DCC implementation:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter dialer interface (physical or
dialer interface) view.
interface
interface-type interface-number N/A
3. Enable PPP callback server.
ppp callback server
By default, PP
callback server is
disabled.
4. Configure the PPP callback
reference.
dialer callback-center
[
user
|
dial-number
] *
N/A
5. Configure a callback client
username.
dialer route
protocol next-hop-address
[
mask
network-mask-length ]
user
hostname [
broadcast
] [ dial-number
[
autodial
|
interface
interface-type
interface-number ] * ]
N/A
6. Exit to system view.
quit
N/A

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English