HPE FlexNetwork MSR Series Comware 5 Layer 2 - Wan Access Configuration Guide

159
[RouterA-Bri1/0] link-protocol ppp
[RouterA-Bri1/0] ppp authentication-mode pap
[RouterA-Bri1/0] ppp pap local-user usera password simple usera
e. Configure Router B:
# Configure a dial access control rule for dialer access group 2. Create a local user account
usera for Router A, and configure PPP authentication for it.
<RouterB> system-view
[RouterB] dialer-rule 2 ip permit
[RouterB] local-user usera
[RouterB-luser-usera] password simple usera
[RouterB-luser-usera] service-type ppp
[RouterB-luser-usera] quit
# Assign an IP address to interface Dialer0, enable RS-DCC, and configure the remote
username allowed to call in.
[RouterB] interface dialer 0
[RouterB-Dialer0] ip address 100.1.1.2 255.255.255.0
[RouterB-Dialer0] dialer user usera
[RouterB-Dialer0] dialer bundle 1
# Configure information for PPP authentication and the dial string on interface Dialer0.
[RouterB-Dialer0] dialer-group 2
[RouterB-Dialer0] ppp authentication-mode pap
[RouterB-Dialer0] dialer number 8810048
[RouterB-Dialer0] ppp pap local-user userb password simple userb
[RouterB-Dialer0] quit
# Configure PPP authentication on interface BRI 1/0 and assign it to dialer bundle 1.
[RouterB] interface bri 1/0
[RouterB-Bri1/0] dialer bundle-member 1
[RouterB-Bri1/0] link-protocol ppp
[RouterB-Bri1/0] ppp authentication-mode pap
[RouterB-Bri1/0] ppp pap local-user usera password simple usera
f. Configure Router C:
# Configure a dial access control rule for dialer access group 2. Create a local user account
usera for Router A and configure PPP authentication for it.
<RouterC> system-view
[RouterC] dialer-rule 1 ip permit
[RouterC] local-user usera
[RouterC-luser-usera] password simple usera
[RouterC-luser-usera] service-type ppp
[RouterC-luser-usera] quit
# Assign an IP address to interface Dialer0, enable RS-DCC, and configure the remote
username allowed to call in.
[RouterC] interface dialer 0
[RouterC-Dialer0] ip address 122.1.1.2 255.255.255.0
[RouterC-Dialer0] dialer user usera
[RouterC-Dialer0] dialer bundle 1
# Configure information for PPP authentication and the dial strings on interface Dialer0.
[RouterC-Dialer0] dialer-group 1
[RouterC-Dialer0] dialer number 8810048

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English