HPE FlexNetwork MSR Series

161
# Assign an IP address to interface Dialer0, enable RS-DCC, and configure MP.
[RouterA] interface dialer 0
[RouterA-Dialer0] ip address 100.1.1.1 255.255.255.0
[RouterA-Dialer0] dialer bundle 1
[RouterA-Dialer0] ppp mp
[RouterA-Dialer0] dialer threshold 50
# Configure information for PPP authentication, the remote user allowed to call in, and the dial
strings on interface Dialer0.
[RouterA-Dialer0] dialer user userb
[RouterA-Dialer0] dialer-group 1
[RouterA-Dialer0] ppp authentication-mode pap
[RouterA-Dialer0] ppp pap local-user usera password simple usera
[RouterA-Dialer0] dialer number 8810052
[RouterA-Dialer0] quit
# Configure PPP authentication on BRI 1/1 and assign it to dialer bundle 1.
[RouterA] interface bri 1/1
[RouterA-Bri1/1] dialer bundle-member 1
[RouterA-Bri1/1] ppp mp
[RouterA-Bri1/1] link-protocol ppp
[RouterA-Bri1/1] ppp authentication-mode pap
[RouterA-Bri1/1] ppp pap local-user usera password simple usera
# Configure PPP authentication on BRI 1/0 and assign it to dialer bundle 1.
[RouterA-Bri1/0] interface bri 1/0
[RouterA-Bri1/0] dialer bundle-member 1
[RouterA-Bri1/0] ppp mp
[RouterA-Bri1/0] link-protocol ppp
[RouterA-Bri1/0] ppp authentication-mode pap
[RouterA-Bri1/0] ppp pap local-user usera password simple usera
2. Configure Router B:
# Configure a dial access control rule for dialer access group 2. Create a local user account
usera for Router A and configure PPP authentication for it, and set the traffic statistics
collecting interval to 3 seconds for DCC.
<RouterB> system-view
[RouterB] dialer-rule 2 ip permit
[RouterB] local-user usera
[RouterB-luser-usera] password simple usera
[RouterB-luser-usera] service-type ppp
[RouterB-luser-usera] quit
[RouterB] dialer flow-interval 3
# Assign an IP address to interface Dialer0, enable C-DCC, and configure the dial strings, MP,
and information for PPP authentication.
[RouterB] interface dialer 0
[RouterB-Dialer0] ip address 100.1.1.2 255.255.255.0
[RouterB-Dialer0] dialer enable-circular
[RouterB-Dialer0] dialer-group 2
[RouterB-Dialer0] dialer route ip 100.1.1.1 8810048
[RouterB-Dialer0] dialer route ip 100.1.1.1 8810049
[RouterB-Dialer0] ppp mp
[RouterB-Dialer0] ppp authentication-mode pap