HPE FlexNetwork MSR Series Comware 5 Layer 2 - Wan Access Configuration Guide

9
Step Command Remarks
4. Configure local or remote AAA
authentication.
For local AAA authentication, the
username and password of the
supplicant must be configured on
the authenticator.
For remote AAA authentication,
the username and password of
the supplicant must be
configured on the remote AAA
server.
For more information about AAA
authentication, see Security
Configuration Guide.
The username configured
for the supplicant must be
the same as that
configured on the
supplicant.
The passwords
configured for the
authenticator and
supplicant must be the
same.
To configure the supplicant:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter interface view.
interface
interface-type
interface-number
N/A
3. Assign a username to
the CHAP supplicant.
ppp chap user
username
The username you assign to
the supplicant must be the
same as the local username
you assign to the supplicant on
the authenticator.
4. Set the CHAP
authentication password.
ppp chap password
{
cipher
|
simple
} password
The password you set for the
supplicant must be the same as
the password you set for the
supplicant on the authenticator.
Configuring MS-CHAP or MS-CHAP-V2 authentication
When you configure MS-CHAP or MS-CHAP-V2 authentication, follow these guidelines:
• In MS-CHAP or MS-CHAP-V2 authentication, an HPE device can only be an authenticator
• L2TP supports the MS-CHAP authentication but does not support the MS-CHAP-V2
authentication.
• MS-CHAP-V2 authentication supports password changing only when using RADIUS.
Depending on whether the authenticator is configured with a username, the configuration of
MS-CHAP or MS-CHAP-V2 authentication includes the following two types:
• Configuring MS-CHAP or MS-CHAP-V2 authentication when the authenticator name is
configured
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter interface view.
interface
interface-type
interface-number
N/A
3. Configure the local router
to authenticate the
supplicant by using
MS-CHAP or
MS-CHAP-V2.
ppp authentication-mode
{
ms-chap
|
ms-chap-v2
}
[ [
call-in
]
domain
isp-name ]
By default, PPP authentication
is not performed.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English