HPE FlexNetwork MSR Series Comware 5 Layer 2 - Wan Access Configuration Guide

8
Step Command Remarks
4. Assign a username to the
CHAP authenticator.
ppp chap user
username
The username you assign to the
authenticator must be the same
as the local username you
assign to the authenticator on
the supplicant.
5. Configure local or remote
AAA authentication.
For local AAA authentication,
the username and password of
the supplicant must be
configured on the authenticator.
For remote AAA authentication,
the username and password of
the supplicant must be
configured on the remote AAA
server.
For more information about
AAA authentication, see
Security Configuration Guide.
The username configured for
the supplicant must be the same
as that configured on the
supplicant.
The passwords configured for
the authenticator and supplicant
must be the same.
To configure the supplicant:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter interface view.
interface
interface-type
interface-number
N/A
3. Assign a username to the
CHAP supplicant.
ppp chap user
username
The username you assign to
the supplicant here must be the
same as the local username
you assign to the supplicant on
the authenticator.
4. Configure local or remote
AAA authentication.
For local AAA authentication, the
username and password of the
supplicant must be configured on
the authenticator.
For remote AAA authentication,
the username and password of
the supplicant must be configured
on the remote AAA server.
For more information about AAA
authentication, see Security
Configuration Guide.
The username configured for
the supplicant must be the
same as that configured on the
supplicant.
The passwords configured for
the authenticator and
supplicant must be the same.
• Configuring CHAP authentication when no authenticator name is configured
To configure the authenticator:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter interface view.
interface
interface-type
interface-number
N/A
3. Configure the local device to
authenticate the supplicant by
using CHAP.
ppp authentication-mode chap
[ [
call-in
]
domain
isp-name ]
By default, PPP
authentication is disabled.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English