278
[LAC-l2tp2] tunnel authentication
[LAC-l2tp2] tunnel password simple 12345
[LAC-l2tp2] quit
[LAC] l2tp-group 1
[LAC-l2tp1] tunnel authentication
[LAC-l2tp1] tunnel password simple 12345
2. Configure the LNS:
# Enable L2TP.
<LNS> system-view
[LNS] l2tp enable
# Enable L2TP for VPNs.
[LNS] l2tpmoreexam enable
# Create two local users, set the passwords, and enable the PPP service.
[LNS] local-user vpdn1
[LNS-luser-vpdn1] password simple 11111
[LNS-luser-vpdn1] service-type ppp
[LNS-luser-vpdn1] quit
[LNS] local-user vpdn2
[LNS-luser-vpdn2] password simple 22222
[LNS-luser-vpdn2] service-type ppp
[LNS-luser-vpdn2] quit
# Specify the IP address of Ethernet 1/1, through which the LNS connects to the tunnel, as
1.1.2.2.
[LNS] interface ethernet 1/1
[LNS-Ethernet1/1] ip address 1.1.2.2 255.255.255.0
[LNS-Ethernet1/1] quit
# Create two address pools.
[LNS] domain aaa.net
[LNS-isp-aaa.net] authentication ppp local
[LNS-isp-aaa.net] ip pool 1 10.0.1.10 10.0.1.100
[LNS-isp-aaa.net] quit
[LNS] domain bbb.net
[LNS-isp-bbb.net] authentication ppp local
[LNS-isp-bbb.net] ip pool 1 10.0.2.10 10.0.2.100
[LNS-isp-bbb.net] quit
# Create two VT interfaces.
[LNS] interface virtual-template 1
[LNS-Virtual-Template1] ip address 10.0.1.1 255.255.255.0
[LNS-Virtual-Template1] remote address pool 1
[LNS-Virtual-Template1] ppp authentication-mode chap domain aaa.net
[LNS-Virtual-Template1] quit
[LNS] interface virtual-template 2
[LNS-Virtual-Template2] ip address 10.0.2.1 255.255.255.0
[LNS-Virtual-Template2] remote address pool 1
[LNS-Virtual-Template2] ppp authentication-mode chap domain bbb.net
[LNS-Virtual-Template2] quit
# Create two L2TP groups.
[LNS] l2tp-group 3
To Next Page
Loading...
