304
# Enable the bridging function.
<RouterB> system-view
[RouterB] bridge enable
[RouterB] bridge 2 enable
# Add Ethernet 1/1 to bridge set 2 and enable VLAN transparency on Ethernet 1/1. Add ATM
5/0 to bridge-set 2 and enable VLAN transparency.
[RouterA] interface ethernet 1/1
[RouterB-Ethernet1/1] bridge-set 2
[RouterB-Ethernet1/1] bridge vlanid-transparent-transmit enable
[RouterB-Ethernet1/1] quit
[RouterB] interface atm5/0
[RouterB-Atm5/0] bridge-set 2
[RouterB-Atm5/0] bridge vlanid-transparent-transmit enable
[RouterB-Atm5/0] pvc to_r1 1/100
[RouterB-Atm5/0-1/100-to_r1] map bridge-group broadcast
To Next Page
Loading...
Need help?
General
