HPE FlexNetwork MSR Series Comware 5 Layer 2 - Wan Access Configuration Guide

325
Step Command Remarks
6. Perform window size
negotiation when initiating
a call.
x25 call-facility window-size
input-window-size
output-window-size
Optional.
Not configured by default.
7. Request reverse charging
when initiating a call.
x25 call-facility
reverse-charge-request
Optional.
Not configured by default.
8. Receive calls with reverse
charging requests.
x25 reverse-charge-accept
Optional.
Not configured by default.
9. Request throughput-level
negotiation when initiating
a call.
x25 call-facility threshold
in out
Optional.
Not configured by default.
10. Carry transmission delay
request when initiating a
call.
x25 call-facility send-delay
milliseconds
Optional.
Not configured by default.
11. Specify the ROA.
x25 call-facility roa-list
name
Optional.
Not configured by default.
2. Address mapping-based configuration
To configure X.25 user facility on an address mapping basis:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Define an ROA list.
x25 roa-list
roa-name
roa-id&<1-10>
Optional.
Not defined by default.
3. Enter interface view.
interface
interface-type
interface-number
N/A
4. Specify the CUG number.
x25 map
protocol-type
protocol-address
x121-address
x.121-address
closed-user-group
number
Optional.
Not specified by default.
5. Perform max packet
negotiation when initiating
a call.
x25 map
protocol-type
protocol-address
x121-address
x.121-address
packet-size
input-packet output-packet
Optional.
Not configured by default.
6. Perform window size
negotiation when initiating
a call.
x25 map
protocol-type
protocol-address
x121-address
x.121-address
window-size
input-window-size
output-window-size
Optional.
Not configured by default.
7. Request reverse charging
when initiating a call.
x25 map
protocol-type
protocol-address
x121-address
x.121-address
reverse-charge-request
Optional.
Not configured by default.
8. Receive calls with reverse
charging requests.
x25 map
protocol-type
protocol-address
x121-address
x.121-address
reverse-charge-accept
Optional.
Not configured by default.
9. Request throughput-level
negotiation when initiating
a call.
x25 map
protocol-type
protocol-address
x121-address
x.121-address
threshold
in out
Optional.
Not configured by default.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English