To Next Page

To Previous Page

367

[RouterC-Serial2/0] x25 map ip 1.1.1.1 x121-address 1111

[RouterC-Serial2/0] x25 map ip 2.1.1.1 x121-address 1111

[RouterC-Serial2/0] x25 map ip 1.1.1.2 x121-address 2222

[RouterC-Serial2/0] x25 map ip 2.1.1.2 x121-address 2222

# Configure interface Serial 2/1.

[RouterC] interface serial 2/1

[RouterC-Serial2/1] link-protocol x25 dte

[RouterC-Serial2/1] x25 x121-address 3333

[RouterC-Serial2/1] ip address 2.1.1.3 255.255.255.0

[RouterC-Serial2/1] x25 map ip 1.1.1.1 x121-address 1111

[RouterC-Serial2/1] x25 map ip 2.1.1.1 x121-address 1111

[RouterC-Serial2/1] x25 map ip 1.1.1.2 x121-address 2222

[RouterC-Serial2/1] x25 map ip 2.1.1.2 x121-address 2222

# Configure static routes to Router A and Router B.

[RouterC] ip route-static 10.1.1.0 24 1.1.1.1

[RouterC] ip route-static 10.1.1.0 24 2.1.1.1

[RouterC] ip route-static 10.2.1.0 24 1.1.1.2

[RouterC] ip route-static 10.2.1.0 24 2.1.1.2

Verifying the configuration

# Display the X.25 address mapping table of Router C.

[RouterC] display x25 map

Interface: Serial2/1(protocol status is UP)

ip 1.1.1.1 X.121 address:1111