HPE FlexNetwork MSR Series Comware 5 Layer 2 - Wan Access Configuration Guide

81
2 errors, 0 runts, 0 giants,
2 CRC, 0 align errors, 0 overruns,
0 dribbles, 0 aborts, 0 no buffers
0 frame errors
Output:0 packets, 0 bytes
0 errors, 0 underruns, 0 collisions
0 deferred
<RouterA> display interface bri 2/0:1
Bri2/0:1 current state :UP
Line protocol current state :UP (spoofing)
Description : Bri2/0:1 Interface
The Maximum Transmit Unit is 1500
baudrate is 128000 bit/s, Timeslot(s) Used: 1, 2
Link layer protocol is PPP
LCP opened, IPCP opened, OSICP opened
Output queue : (Urgent queue : Size/Length/Discards) 0/50/0
Output queue : (Protocol queue : Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0
Last 300 seconds input rate 2.44 bytes/sec, 0.20 packets/sec
Last 300 seconds output rate 2.54 bytes/sec, 0.20 packets/sec
Input: 17782 packets, 220973 bytes
0 broadcasts, 0 multicasts
2 errors, 0 runts, 0 giants,
2 CRC, 0 align errors, 0 overruns,
0 dribbles, 0 aborts, 0 no buffers
0 frame errors
Output:17085 packets, 208615 bytes
0 errors, 0 underruns, 0 collisions
0 deferred
<RouterA> display interface bri 2/0:2
Bri2/0:2 current state :DOWN
Line protocol current state :UP (spoofing)
Description : Bri2/0:2 Interface
The Maximum Transmit Unit is 1500
baudrate is 64000 bit/s, Timeslot(s) Used: NULL
Link layer protocol is PPP
LCP initial
Output queue : (Urgent queue : Size/Length/Discards) 0/50/0
Output queue : (Protocol queue : Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0
Last 300 seconds input rate 0.16 bytes/sec, 0.01 packets/sec
Last 300 seconds output rate 0.16 bytes/sec, 0.01 packets/sec
Input: 17494 packets, 216768 bytes
0 broadcasts, 0 multicasts
2 errors, 0 runts, 0 giants,
2 CRC, 0 align errors, 0 overruns,

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English