283
2. Select the From Device option, and select file p2p_default.
3. Click Apply.
Then, you can view MSN is in the loaded applications on the lower part of the page.
Configuring application control for user group staff
1. Select Advanced > Security > Application Control from the navigation tree, and perform the
configurations as shown in Figure 309.
Figure 309
Con
figuring application control to user group staff
2. Select staff from the user group list.
3. Select MSN from the Loaded Applications area.
4. Click Apply.
A configuration progress dialog box appears.
5. After the configuration process is complete, click Close.
Configuring bandwidth control for user groups staff and manager
1. Select Advanced > Security > Band Width, and then perform the configurations as shown
in Figure 310.
To Next Page
Loading...
Need help?
General
