HPE FlexNetwork MSR Series User Manual

319
Figure 333 Adding an access device
2. Add a user account:
a. Log in to IMC:
b. Click the User tab.
c. Select Access User View > All Access Users from the navigation tree.
d. Click Add.
e. Enter hello@bbb as the username.
f. Enter abc as the password and confirm the password.
g. Select Telnet as the service type.
h. Enter 3 as the EXEC privilege level.
This value identifies the privilege level of the Telnet user after login, which is 0 by default.
i. Click Add under IP Address List of Managed Devices, and then enter 10.1.1.0 as the
start IP address and 10.1.1.255 as the end IP address for the IP address range. The IP
address range of the hosts to be managed must contain the IP address of the access device
added.
j. Click OK.
文件中找不到关系 ID 为r Id418 的图像部件。

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English