HPE FlexNetwork MSR Series User Manual

455
Item Description
Input Gain on the
Voice Interface
When the voice signals on the line
attenuate to a relatively great extent,
increases the voice input gain value.
IMPORTANT:
Gain adjustment might lead to call
failures. You are not recommended to
adjust the gain. If necessary, do it with
the guidance of technical personnel.
Output Gain on the
Voice Interface
When a relatively small voice signal
power is needed on the output line,
increases the voice output gain value.
DTMF Detection
Sensitivity Level
Set the DTMF detection sensitivity level.
• Low—In this mode, the reliability is high, but DTMF tones might fail to be
detected.
• Medium—In this mode, the reliability is medium. If you select this option, you
can specify the Frequency Tolerance of Medium DTMF Detection
Sensitivity Level. The greater the value, the higher the probability of false
detection. Support for this option varies with installed cards.
• High—In this mode, the reliability is low and detection errors might occur.
Select the Line(s)
Select the boxes of desired lines, and then click the
Apply to Selected Line(s)
button to apply the above settings to the selected FXO lines.
E&M line configuration
Select Voice Management > Advanced Configuration > Batch Configuration from the
navigation tree, and then click the E&M Line Configuration link in the Line Management area to
access the E&M line configuration page, as shown in Figure 856.
Figure 856
E&M line configura
tion page
Table 306 Configuration items
Item Description
Max Interval for
Dialing the Next
Digit
Specify the maximum interval for the user to dial the next digit.
This timer will restart each time the user dials a digit and will work in this way until all
the digits of the number are dialed. If the timer expires before the dialing is
completed, the user will be prompted to hang up and the call is terminated.
Input Gain on the
Voice Interface
When the voice signals on the line
attenuate to a relatively great extent,
increases the voice input gain value.
IMPORTANT:
Gain adjustment might lead to call

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English