6: SCPI command reference Model 2450 Interactive SourceMeter® Instrument
6-24 2450-901-01 Rev. B/September 2013
:DISPlay:LIGHt:STATe
This command sets the brightness of the front-panel display.
Type Affected by Where saved Default value
Command and query
ON75
Usage
:DISPlay:LIGHt:STATe <brightness>
:DISPlay:LIGHt:STATe?
The brightness of the display:
• 100%: ON100
• 75%: ON75
• 50%: ON50
• 25%: ON25
• Display off: OFF
• Display and all indicators off:
Details
This command determines the brightness of the front-panel display.
Screen life is affected by how long the screen is on at full brightness. The higher the brightness
setting and the longer the screen is bright, the shorter the screen life.
Example
Set the display brightness to 50%
Also see
None
To Next Page
Loading...
Need help?
General
