Keithley 2450

Model 2450
Interactive SourceMeter® Instrument Reference Manual Section 6:
SCPI command reference
2450-901-01 Rev. B/September 2013 6-25
:DISPlay:READing:FORMat
This command determines the format that is used to display measurement readings on the front-panel display of
the instrument.
Type Affected by Where saved Default value
Command and query
Not applicable
Nonvolatile memory
PREF
Usage
:DISPlay:READing:FORMat <format>
:DISPlay:READing:FORMat?
<format>
Use exponent format: EXPonent
Use leading zeros:
PREFix
Details
This setting only affects the front-panel display. It does not affect the readings in buffers.
When the prefix option is selected, the display automatically shows in exponent format when the prefix format
does not fit.
Example
DISP:READ:FORM EXP
Change front-panel display to show readings in
exponent format.
Also see
None