Interactive SourceMeter® Instrument Reference Manual Section 7:
Introduction to TSP operation
2450-901-01 Rev. B/September 2013 7-29
Test Script Builder (TSB)
Keithley Instruments Test Script Builder (TSB) is a software tool included with your Model 2450. You
can install and use TSB to develop scripts for TSP-enabled instruments.
Installing the TSB software
To install the Test Script Builder (TSB) software:
1. Close all programs.
2. Place the Test Script Builder Software Suite CD into your CD-ROM drive or start the software
from the downloaded file.
3. Follow the on-screen instructions.
If you are using the CD-ROM and the web browser does not start automatically and display a screen
with software installation links, open the installation file (setup.exe) located on the CD-ROM to start
installation.
Installing the TSB add-in
When you install the Test Script Builder Software Suite, all available updates for TSB Add-in software
are also installed. This includes any additional tools for the Test Script Builder Integrated
Development Environment (TSB), and also Model 2450-specific examples and help files (see
Installing the TSB software (on page 7-29
)). In addition to the software suite, a separate add-in is
provided on the product specific CD. You can use this add-in to update previous TSB software
installations.
Before installing the TSB Add-in software, you must install the TSB software.
To install the TSB Add-in software:
1. Close all programs.
2. Place the Product Information CD into your CD-ROM drive.
3. Double-click the Add-in to start installation.
4. Follow the on-screen instructions.
If your web browser does not start automatically and display a screen with software installation links,
open the installation file (setup.exe) located on the CD-ROM to start installation.
To Next Page
Loading...
Need help?
General
