Interactive SourceMeter® Instrument Reference Manual Section 8: TSP
2450-901-01 Rev. B/September 2013 8-7
TSP commands
beeper.beep()
This function generates an audible tone.
Type TSP-Link accessible
Affected by Where saved Default value
Usage
beeper.beep(duration, frequency)
The amount of time to play the tone in seconds (0.001 to 100)
The frequency of the beep (20 to 8000)
Details
You can use the beeper of the Model 2450 to provide an audible signal at a specific frequency and time duration.
For example, you can use the beeper to signal the end of a lengthy sweep.
Example
Generates a two-second, 2400 Hz tone.
Also see
None
To Next Page
Loading...
