To Next Page

To Previous Page

Model 2450

Interactive SourceMeter® Instrument Reference Manual Section 6:

SCPI command reference

2450-901-01 Rev. B/September 2013 6-103

:SYSTem:EVENtlog:SAVE

This command saves the event log to a file on a USB flash drive.

Type Affected by Where saved Default value

Command only

Not applicable

Usage

:SYSTem:EVENtlog:SAVE <filename>

:SYSTem:EVENtlog:SAVE <filename>, <eventType>

:SYSTem:EVENtlog:SAVE <filename>, <eventType>, <eventType>

A string that holds the name of the file to be saved

Limits the event log entries that are saved to specific types; set to:

• ERRor: Saves only error entries

• WARNing: Saves only warning entries

• INFormational: Saves only informational messages

•

ALL: Saves all event log entries

Details

This command saves all event log entries since the last clear command to a USB flash drive.

You must insert the USB flash drive before sending this command.

If you do not define an event type, the instrument saves all event log entries.

The extension .csv is automatically added to the file name.

Example

SYST:EVEN:SAVE "July_error_log", ERR

Saves the error events in the event log to a

file on the USB flash drive named

July_error_log.csv

Also see

:SYSTem:CLEar (on page 6-96)

Keithley 2450 User Manual

Other manuals for Keithley 2450