To Next Page

To Previous Page

Model 2450

Interactive SourceMeter® Instrument Reference Manual Section 6: SCPI command re

ference

2450-901-01 Rev. B/September 2013 6-157

:TRIGger:LAN<n>:OUT:CONNect:STATe

This command prepares the event generator for outgoing trigger events.

Type Affected by Where saved Default value

Command and query Not applicable Not applicable Not applicable

Usage

:TRIGger:LAN<n>:OUT:CONNect:STATe <b>

:TRIGger:LAN<n>:OUT:CONNect:STATe?

<n>

The LAN event number (1 to 8)

<b>

Do not send event messages: OFF or 0

Prepare to send event messages:

Details

When this is set to on, the instrument prepares the event generator to send event messages. For TCP

connections, this opens the TCP connection.

The event generator automatically disconnects when either the protocol or IP address for this event are changed.

When this is set to OFF, for TCP connections, this closes the TCP connection.

Example

:TRIGger:LAN1:OUT:PROTocol MULT

:TRIGger:LAN1:OUT:CONNect:STATe ON

Set the protocol to multicast and prepare the

event generator to send event messages.

Also see

:TRIGger:LAN<n>:OUT:IP:ADDRess (on page 6-158)

:TRIGger:LAN<n>:OUT:PROTocol (on page 6-159)

Keithley 2450 User Manual

Other manuals for Keithley 2450