Keithley 2450

Model 2450
Interactive SourceMeter® Instrument Reference Manual Section 8:
TSP command reference
2450-901-01 Rev. B/September 2013 8-165
timer.cleartime()
This function resets the timer to zero (0) seconds.
Type TSP-Link accessible
Affected by Where saved Default value
Function
No
Usage
timer.cleartime()
Example
timer.cleartime()
delay(3)
print(timer.gettime())
Also see
timer.gettime() (on page 8-165)
timer.gettime()
This function measures the elapsed time since the timer was last cleared.
Type TSP-Link accessible
Affected by Where saved Default value
Function
No
Usage
time = timer.gettime()
time
The elapsed time in seconds (1 µs resolution)
Example 1
timer.cleartime()
delay(3)
print(timer.gettime())
Also see
timer.cleartime() (on page 8-165)