Keithley 2450

Section
8: TSP command reference Model 2450 Interactive SourceMeter® Instrument
Reference Manual
8-220 2450-901-01 Rev. B/September 2013
trigger.timer[N].reset()
This function resets trigger timer settings to their default values.
Type TSP-Link accessible
Affected by Where saved Default value
Function
Yes
Usage
trigger.timer[N].reset()
N
Trigger timer number (1 to 4)
Details
The trigger.timer[N].reset() function resets the following attributes to their default values:
• trigger.timer[N].count
• trigger.timer[N].delay
• trigger.timer[N].delaylist
• trigger.timer[N].enable
• trigger.timer[N].start.generate
• trigger.timer[N].start.fractionalseconds
• trigger.timer[N].start.seconds
• trigger.timer[N].stimulus
It also clears trigger.timer[N].overrun.
Example
trigger.timer[1].reset()
Resets the attributes associated with timer 1 to
their default values.
Also see
trigger.timer[N].count (on page 8-216)
trigger.timer[N].delay (on page 8-217)
trigger.timer[N].delaylist (on page 8-217)
trigger.timer[N].enable (on page 8-219)
trigger.timer[N].start.fractionalseconds (on page 8-221)
trigger.timer[N].start.generate (on page 8-221)
trigger.timer[N].start.overrun (on page 8-222)
trigger.timer[N].start.seconds (on page 8-222)
trigger.timer[N].start.stimulus (on page 8-223)