Interactive SourceMeter® Instrument Reference Manual Section 8:
2450-901-01 Rev. B/September 2013 8-11
Example
print(buffer.getstats(defbuffer1))
Get statistics on defbuffer1. Returns a table.
Output:
17ac630
The table has the following entries in it:
n, min, max, mean, stddev
defBufStats = buffer.getstats(defbuffer1)
print(defBufStats)
Assign the name
to the table.
Get statistics for the default reading buffer
named defbuffer1
Returns the defBufStats table with the
following entries in it:
n, min, max, mean, stddev
Also see
buffer.delete() (on page 8-9)
buffer.make() (on page 8-11)
bufferVar.clear() (on page 8-17)
print() (on page 8-77)
printbuffer() (on page 8-78)
Reading buffers (on page 3-10)
Remote buffer operation (on page 3-27)
buffer.make()
This function creates a user-defined reading buffer.
Type TSP-Link accessible
Affected by Where saved Default value
Usage
bufferVar = buffer.make(bufferSize)
The name of a user-defined buffer
The maximum number of readings that can be stored in bufferVar; minimum is
10
Details
This function creates a user-defined reading buffer.
You cannot assign user-defined reading buffers the same name as an existing buffer, including defbuffer1 or
defbuffer2.
Example
capTest2 = buffer.make(200)
Creates a 200-element reading buffer named capTest2.
Also see
Reading buffers (on page 3-10)
Remote buffer operation (on page 3-27)
To Next Page
Loading...
Need help?
General
