Keithley 2450 User Manual

Model 2450
Interactive SourceMeter® Instrument Reference Manual Section 6:
SCPI command reference
2450-901-01 Rev. B/September 2013 6-145
:TRIGger:BLOCk:NOP
This command creates a placeholder that performs no action in the trigger model.
Type Affected by Where saved Default value
Command only
Recall settings
Instrument reset
Power cycle
Save settings
Not applicable
Usage
TRIGger:BLOCk:NOP <blockNumber>
<blockNumber>
The sequence of the block in the trigger model
Details
If you remove a trigger model block, you can use this block as a placeholder for the block number so that you do
not need to renumber the other blocks.
Example
TRIG:BLOC:NOP 5
Set block number 5 to be a no operation block.
Also see
None

Keithley 2450 Specifications

General

Brand	Keithley
Model	2450
Category	Test Equipment
Language	English