Checking Feature Selections and Proof Copying (continued)
3-58
7. Change the print quantity, as required.
FOR DETAILS
Proof copy can be performed as needed, until the print quantity amount
on the Basic Screen reaches zero. (Note that the print quantity amount
on the Check Screen does not change.)
If required, change the print quantity on the Basic Screen.
8. Press [START].
If the print quantity is not changed, the copier will output the rest, except the
sample sets.
CAUTION
When the finisher / shift tray / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied
sets as they exit; otherwise, mishandled paper will occur.
To Next Page