9-36
Repeating Automatically Or Selecting Repeating
Times(Repeat: AUTO/ Repeat Mode)
Auto Detection mode will automatically set the equal repeat area to the size of
the original placed onto the platen glass by activating Non-image area erase.
Repeat mode will scan the image area specified by the selected paper size
and mode (2 Repeat, 4 Repeat, or 8 Repeat), then arrange the image by
specified times in one copy sheet.
>>>Auto Detection/ Repeat Mode Specifications<<<
❒ Auto Detection Mode: Use the platen glass. RADF cannot be used.
❒ Repeat Mode Magnification ratio: 1.00 (100 %) fixed
❒ Incompatible Conditions with Auto Detection Mode
Using RADF, 2-2, 2-1, APS, AMS, Rotation, Group, Rotation Sort, Rotation Group,
Mixed Original, Z-Folded Original, Sheet/Cover Insertion, Chapter, Combination,
Booklet, OHP Interleave, Image Insert, Dual Page, Reverse Image, Frame/Fold
Erasure, AUTO Layout, Full-Image Area, Reduce & Shift in Image Shift, Stamp/Overlay
❒ Incompatible Conditions with Repeat Mode
APS, AMS, Rotation (if magnification is changed from 1.00), Group, Rotation
Sort, Rotation Group, Mixed Original, Z-Folded Original, Chapter, Combination,
Booklet, OHP Interleave, Image Insert, Dual Page, Non-Image Area Erase,
Reverse Image, Frame/Fold Erasure, AUTO Layout, Reduce & Shift in Image
Shift, Overlay, Overlay Memory
Auto Detection mode
Repeat mode
Copy
(2 Repeat)
Copy
(4 Repeat)
Copy
(8 Repeat)
Copy
To Next Page
Loading...
