1-2
Caution Labels and Indicators
The caution labels and indicators are attached to the machine areas, as
shown below, where you are advised to pay special attention to avoid any
dangerous situations or serious injury.
The fixing unit is
very hot. To avoid
getting burned, DO
NOT TOUCH.
DO NOT put your hand between
the main body and developing
fixing unit; otherwise you may
be injured.
The conveyance fixing
unit is heavy. Use care
and draw it out gently;
otherwise you may be
injured.
This area generates
high voltage. If touched,
electrical shock may
occur. DO NOT TOUCH.
DO NOT INSERT
your finger into the
two RADF hinge
portions;
otherwise you may
be injured.
To Next Page
Loading...
