Printing Stamp, Page, Date/Time onto Copies (Stamp) (continued)
9-53
2. Touch Stamp/Overlay on the Application Selection Screen.
The Stamp/Overlay Selection Screen will be displayed.
3. Touch to select the desired key in the STAMP area.
The subsequent screen will be displayed to allow you to specify the selected
stamp type.
4. When selecting STAMP: Specify the stamp type, printing position,
character size and printed page.
Touch to highlight the desired stamp key and printing position key on the
screen. If fine adjustment is required, touch FINE ADJ. OF POSITION to dis-
play the Fine Adjustment Setting Screen. See p. 9-56 for details.
Touch CHARACTER SIZE to select LARGER or SMALLER.
Touch PRINTED PAGE to designate whether to print the selected stamp on
the cover only or on all pages.
Applications
Reverse
Image
Non-Image
Area Erase
Program Job
Dual Page
Image Insert
OHP
Interleave
Booklet
Combination
Chapter
Sheet/Cover
Insertion
Application
Selection Screen
Repeat
Frame/Fold
Erasure
AUTO
Layout
Full-Image
Area
Image Shift
Reduce &
Shift
Stamp
Overlay
Overlay
Memory
To Next Page