Copying Z-Folded Originals (Z-Folded Original) (continued)
8-11
5. Enter the desired print quantity from the control panel keypad.
HINT
See p. 3-6 for details on setting print quantity.
6. Position mixed original(s) FACE UP in the document feeder.
FOR DETAILS
Normal originals can also be loaded at the same time.
HINTS
• See p. 3-4 for details on positioning originals.
• Use RADF store mode (p. 3-33 to p. 3-34) when the original count
exceeds 100.
7. Press [START].
CAUTION
When the finisher / shfit tray / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied
sets as they exit; otherwise, mishandled paper will occur.
Special
Original
Original
Form
Z-Folded
Original
Mixed
Original
Text/Photo
Enhance
Original
Binding Direction
Original
Direction
To Next Page
Loading...
