Konica Minolta 7255 - FS-110;FS-210 Finisher (+PK-110;120;120 Type-A Punching Kit)

Machine Configuration (continued)
2-8
FS-110/FS-210 Finisher (+PK-110/120/120 Type-A Punching Kit)
1 Finisher door opens to the internal Finisher to allow clearing mishandled
paper, replenishing staples, and emptying waste basket of Punching kit.
2 Booklet mode outlet (FS-210 Finisher only) ejects finished copied sets
when selecting Fold mode, Stitch & Fold mode, or Three-fold mode.
3 Booklet tray (FS-210 Finisher only) holds sets output in Fold mode,
Stitch & Fold mode, or Three-fold mode.
4 Primary (Main) tray holds sets output in Non-sort mode, Sort mode
(offset), Staple-sort mode, or Group mode (offset).
5 Secondary (Sub) tray holds sets output in Non-sort mode or Group
mode with face down/up mode.
FS-210 FinisherFS-110 Finisher
1 Finisher door1 Finisher door
2 Booklet mode outlet
(FS-210 Finisher only)
3 Booklet tray
(FS-210 Finisher only)
4 Primary
(Main) tray
4 Primary
(Main) tray
5 Secondary
(Sub) tray
5 Secondary
(Sub) tray