Konica Minolta 7255 - Making Double-Sided Copy (1-2, 2-2); Using Memory; Using RADF

3-21
Making Double-Sided Copy (1-2, 2-2)
The Basic Screen is initially set to 1-1 copy mode to make single-sided
copies from single-sided originals.
Follow the procedure below to make double-sided copies from the originals
scanned from the document feeder or from the platen glass.
Using RADF
Select the copy mode according to the original type (single-sided or double-
sided).
1. Touch 1-2 or 2-2 on the Basic Screen to highlight it.
Please Be Reminded!
When starting a new copying job, be sure to close the RADF securely,
then press [AUTO RESET].
Double-sided original
Duplex copy
Duplex copy
Single-sided original
2-2 Copying
1-2 Copying
Back Back Back
Back Back Back
Back Back Back
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-1, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Finisher
Output Mode
Binding
Mode
Shift Tray
Output Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode