Konica Minolta 7255 - Cover Sheet Feeder; PK-110;120 Punching Kit; Special; Type-A Punching Kit

Option Specifications (continued)
6-5
These specifications are subject to change without notice.
Machine
Specifications
PI-110 Cover Sheet Feeder
Function: Paper feed into Finisher FS-110/210
Configuration: 2 trays (upper/lower)
Capacity: 200 sheets max. or 30mm or less (200g/m
2
paper) each
Paper type: Plain/Recycled (60 to 90g/m
2
), Thick (91 to 200g/m
2
),
Thin (50 to 59g/m
2
), Special (Transparent film, Labels, Tab, 4-
hole)
Paper size: Upper tray: A4, A4R, B5, B5R, A5, 8.5"x11", 8.5"x11"R, 5.5"x8.5"
Lower tray: A3, B4, F4, A4, A4R, B5, B5R, A5, 11"x17",
8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", Wide size
(max. 314mm x 445mm)
Dimensions: 511(W) x 620(D) x 220(H) mm
Weight: Approx. 10.5kg
Power source: Supply from finisher
PK-110/120 Punching Kit
Function: Punching file holes in copies
Number of punch holes: 4
Hole diameter: 6.5mm ± 0.5mm
Hole pitch: 80mm ± 0.5mm
Paper type: Plain/Recycled (60 to 90g/m
2
)
Thick (91 to 170g/m
2
), Thin (50 to 59g/m
2
)
*Some 170g/m
2
paper types may not be punched easily.
Paper size: A3, B4, F4, A4, B5, 11"x17", 8.5"x11"
Dimensions: PK-110: 68(W) x 442(D) x 120(H) mm
PK-120: 130(W) x 470(D) x 115(H) mm
Weight: PK-110: Approx. 2kg
PK-120: Approx. 3kg
Power source: Supply from finisher
PK-120 Type-A Punching Kit
Function: Punching file holes in copies
Number of punch holes: 4
Hole diameter: 6.5mm ± 0.5mm
Hole pitch: 21mm ± 0.5mm/70mm ± 0.5mm/21mm ± 0.5mm
Paper type: Plain/Recycled (60 to 90g/m
2
)
Thick (91 to 170g/m
2
), Thin (50 to 59g/m
2
)
*Some 170g/m
2
paper types may not be punched easily.
Paper size: A3, B4, F4, A4, B5, 11"x17", 8.5"x11"
Dimensions: 130(W) x 470(D) x 115(H) mm
Weight: Approx. 3kg
Power source: Supply from finisher