[9] Weekly Timer (continued)
13-29
[1] Weekly Timer On/Off Setting
Weekly Timer Setting Menu Screen Weekly Timer On/Off Setting Screen
Procedure
1 Touch [9] Weekly timer on the Key Operator Mode Screen. Enter your 4-digit
Weekly Timer master key code, then touch OK to display the Weekly Timer
Setting Menu Screen.
NOTE:
If an invalid Weekly Timer master key code is entered, continue by
entering the valid 4-digit code.
2 Touch [1] Weekly timer ON/OFF setting to display the Weekly Timer On/Off
Setting Screen.
3 Touch Weekly timer On to activate Weekly Timer, or touch Weekly timer Off
to de-activate Weekly Timer. The default setting is Weekly timer Off.
The selected key will be highlighted.
4 Touch OK to complete the setting and return to the Weekly Timer Setting Menu
Screen.
5 Touch RETURN to restore the Key Operator Mode Screen.
6 If no further changes are required, touch RETURN to restore the Basic Screen
to perform copying operations.
Key Operator
Mode
Non-Image
Area Erase
Scan
Transmission
HDD
Management
Centring
Adjustment
Timing
Adjustment
Background
Adjustment
Finisher
Adjustment
Side 2 Lens
Adjustment
Call Remote
Centre
Machine
Management
List Print
Memory
Switch
Power Save
Setting
Tray Auto
Select Setting
Control Panel
Adjustment
Weekly
Timer
Key Operator
Data Setting
Panel Contrast/
Key Sound
Paper Type/
Special Size
Lock/Delete
Job Memory
E.K.C.
User Setting
Mode
Copier Initial
Setting
System Initial
Setting
Key Operator
Mode
To Next Page