Konica Minolta 7255 - Finisher

Machine Configuration (continued)
2-10
FS-111 Finisher
1 Finisher door opens to the internal Finisher to allow clearing mishandled
paper and replenishing staples.
2 Primary (Main) tray holds sets output in Non-sort mode, Sort mode
(offset), Staple-sort mode, or Group mode (offset).
3 Secondary (Sub) tray holds sets output in Non-sort mode or Group
mode with face down/up mode.
4 Secondary (Sub) tray cover opens to allow clearing mishandled paper.
1 Finisher doo
r
4 Secondary (Sub) tray cover
2 Primary
(Main) tray
3 Secondary
(Sub) tray