Specifying Original Direction (continued)
8-3
3. Touch OK to complete the setting and return to the Basic Screen.
The SPECIAL ORIGINAL key on the Basic Screen is highlighted, and the
icon in the message area indicates the selected original direction.
4. Make other compatible selections.
5. Enter the desired print quantity from the control panel keypad.
HINT
See p. 3-6 for details on setting print quantity.
6. Position originals FACE UP in the document feeder or FACE
DOWN on the platen glass according to the original direction
specified in step 2.
HINT
See the illustration on previous page, and p. 3-2 to p. 3-5 for details on
positioning originals.
7. Press [START].
CAUTION
When the finisher / shift tray / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied
sets as they exit; otherwise, mishandled paper will occur.
Special
Original
Original
Form
Z-Folded
Original
Mixed
Original
Text/Photo
Enhance
Original
Binding Direction
Original
Direction
To Next Page
Loading...
