[17] Finisher Adjustment (continued)
13-51
1st Z-Fold Position Adjustment Screen 2nd Z-Fold Position Adjustment Screen
Three-Fold Position Adjustment Screen 2 Positions Staple Pitch Adjustment Screen
Procedure
1 Touch [17] Finisher adjustment on the Key Operator Mode Screen to display
the Finisher Adjustment Menu Screen.
2 Touch the desired menu key to display the adjustment screen for each function.
3 Make fine adjustment on the screen.
To go on or back to another adjustment screen, touch NEXT or BACK.
Touching RETURN restores the Finisher Adjustment Menu Screen.
4 Touch RETURN to restore the Key Operator Mode Screen.
5 If no further changes are required, touch RETURN to restore the Basic Screen
to perform copying operations.
Key Operator
Mode
Non-Image
Area Erase
Scan
Transmission
HDD
Management
Centring
Adjustment
Timing
Adjustment
Background
Adjustment
Finisher
Adjustment
Side 2 Lens
Adjustment
Call Remote
Centre
Machine
Management
List Print
Memory
Switch
Power Save
Setting
Tray Auto
Select Setting
Control Panel
Adjustment
Weekly
Timer
Key Operator
Data Setting
Panel Contrast/
Key Sound
Paper Type/
Special Size
Lock/Delete
Job Memory
E.K.C.
User Setting
Mode
Copier Initial
Setting
System Initial
Setting
Key Operator
Mode
To Next Page
Loading...
