Paper Information (continued)
11-3
HINTS
• See p. 13-23 for Paper Type setting of Tray 1, 2, 3, 4 or LCT.
• See p. 3-29 for Paper Type setting of Multi-sheet bypass tray.
Tray/ Exit Tray Capacity
Paper Trays Capacity
Tray 1 (Main body tray) 1,500 sheets (80 g/m
2
)
Tray 2 (Main body tray) 1,000 sheets (80 g/m
2
)
Tray 3 and 4 (Main body tray) 500 sheets (80 g/m
2
)
LCT (LT-402/LT-412) 4,000 sheets (80 g/m
2
)
Multi-sheet bypass tray 100 sheets (80 g/m
2
)
1 sheet each for thick/thin paper and
transparent film
Equipments Capacity
ADU Unlimited
Finisher
(FS-110/FS-
111/FS-210)
Secondary (sub) tray
200 sheets
Primary (main)
tray
500 sheets (A5, A5R)
3,000 sheets (FS-110: A4, A4R, B5R,
8.5"x11", 8.5"x11"R)
2,500 sheets (FS-210: A4, A4R, B5R,
8.5"x11", 8.5"x11"R)
1,500 sheets (A3, F4, B4)
1,000 sheets* (Staple-sort mode)
*See the following table.
Finisher
(FS-210)
Booklet tray
100 sheets (A3, B4, 11"x17", 8.5"x14" in Fold/
Stitch&Fold mode)
Fold: 33 sets for 3-sheet-folded booklet
(99 sheets, 396 pages)
Stitch&Fold: 20 sets for 5-sheet-folded book-
let (100 sheets, 400 pages)
75 sheets (A4R, 8.5"x11"R in Fold/ Stitch&Fold
mode)
Fold: 25 sets for 3-sheet-folded booklet
(75 sheets, 300 pages)
Stitch&Fold: 15 sets for 5-sheet-folded book-
let (75 sheets, 300 pages)
50 sheets (1 folded sheet in Three-Fold mode)
Cover sheet feeder (2 trays) 200 sheets (200 g/m
2
) for each
Punching kit Unlimited
Punching / Z-Folding unit Punch: Unlimited
Z-Fold: 1 sheet only
See the table on the next page for using
Staple-sort with Z-Fold mode.
Paper &
Original Info
Original
Information
Paper
Information
To Next Page
Loading...
