Konica Minolta 7255 - Memory Switch Setting

13-39
[13] Memory Switch Setting
This function allows you to change the Memory Settings listed below. See pp. 13-
41 ~ 13-46 for details on Memory Settings.
SW No. Item Setting (default is underlined)
No. 01: Auto reset timer OFF
/ 30 sec. / 60 sec. / 90 sec. / 120 sec./
150 sec. / 180 sec. / 210 sec. / 240 sec. /
270 sec. / 300 sec.
No. 02: AUTO RESET key function Full-Auto
/ Initial Setting
No. 03: RADF-Original effect RADF+AUTO RESET key selected / RADF
selected
No. 04: Job memory auto recall (30) OFF / ON
No. 05: Finisher mode by Full-auto Face down (Sub tray) / Non-sort / Sort
/
Staple sort / Stitch&Fold / Fold / Face up
(Sub tray)
No. 06: Initial by Key counter insert OFF / ON
No. 07: Erasure outside area of orig. Erased for except Platen (1:1) / Area outside
of orig. erased / Erased for APS/AMS only
No. 08: RADF frame erasure selection None / 1mm frame / 2mm frame / 3mm
frame / 4mm frame / 5mm frame
No. 09: Automatic tray switching OFF
/ ON
No. 10: Platen APS OFF / ON
No. 11: RADF APS OFF / ON
No. 12: Platen AMS OFF / ON
No. 13: RADF AMS OFF / ON
No. 14: Select tray when APS cancel APS preferential tray / Tray 1 / Tray 2 /
Tray 3 / LCT / Bypass tray
No. 15: Platen original size detect Only A series
/ Full size / AB series / Inch
series
No. 16: RADF original size detect Only A series
/ Full size / AB series / Inch
series
No. 17:
Platen orig. size detect (SMALL) A5R / B6R / 5.5"x8.5"R / B5 / A4 / 8.5"x11"/
A6R
No. 18: Rotation
ON-APS/AMS only / ON-APS/AMS/Reduce
only / ON-Always
No. 19: Staple mode reset-function OFF / ON
No. 20: Job offset operating OFF
/ ON
No. 21: Continuation print OFF
/ ON
No. 22: Key click sound OFF
/ ON
No. 23: 1 SHOT indication time 3 seconds
/ 5 seconds
No. 24: Power save screen Shut off mode
/ Low power mode
No. 25: START key latch function OFF
/ ON
Key Operator
Mode
Non-Image
Area Erase
Scan
Transmission
HDD
Management
Centring
Adjustment
Timing
Adjustment
Background
Adjustment
Finisher
Adjustment
Side 2 Lens
Adjustment
Call Remote
Centre
Machine
Management
List Print
Memory
Switch
Power Save
Setting
Tray Auto
Select Setting
Control Panel
Adjustment
Weekly
Timer
Key Operator
Data Setting
Panel Contrast/
Key Sound
Paper Type/
Special Size
Lock/Delete
Job Memory
E.K.C.
User Setting
Mode
Copier Initial
Setting
System Initial
Setting
Key Operator
Mode