10-4
Storing/Deleting Image Data in HDD/PC (Image
Store/Delete)
Use this function to store the image data into HDD/PC. In the event data is
already stored in HDD/PC, use this function to transmit it from HDD to PC or
delete it from HDD/PC.
FOR DETAILS
• Installation of the optional HDD (HD-105) is required for storing data
in the HDD.
• To store data in PC, the machine should be connected to PC by
cross-cable, or with network provided that a specific software for
using Server function is installed in PC.
• The above two conditions should be fulfilled for transmitting data from
HDD to PC.
To Store Image Data in HDD/PC
Specify your password when storing the data in HDD/PC for protection.
Image data can be given an alphabetical job name.
>>>Specifications for Storing Image Data in HDD/PC<<<
❒ Incompatible Scanning Conditions: 1-2, 2-2, AMS, Selecting output mode,
Selecting paper size (APS is automatically selected), Setting print quantity,
Rotation, FULL AREA in Non STD Size, Sheet/Cover Insertion, Chapter,
Combination, Booklet, OHP Interleave, Image Insert, Dual Page, Program
Job (available in Image Store&Output Mode only), Non-Image Area Erase,
Reverse Image, Repeat, AUTO Layout, Image Shift, Stamp/Overlay
1.
Press [MODE] to light up the [SCAN/SERVER]
LED.
The Scan/Server Setting Menu Screen will be dis-
played.
HDD
DIMM
Scan
Store
Store
To Next Page