Repeating Selected Image Area (Repeat: Vert./Horiz. Mode) (continued)
9-35
7. Enter the desired print quantity from the control panel keypad.
HINT
See p. 3-6 for details on setting print quantity.
8. Position original FACE DOWN on the platen glass.
HINT
See the illustration on p. 9-33 for details.
9. Press [START].
CAUTION
When the finisher / shift tray / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied
sets as they exit; otherwise, mishandled paper will occur.
Applications
Reverse
Image
Non-Image
Area Erase
Program Job
Dual Page
Image Insert
OHP
Interleave
Booklet
Combination
Chapter
Sheet/Cover
Insertion
Application
Selection Screen
Repeat
Frame/Fold
Erasure
AUTO
Layout
Full-Image
Area
Image Shift
Reduce &
Shift
Stamp
Overlay
Overlay
Memory
To Next Page
Loading...
