When “JAM” Appears on Folder Key (Or Arrow Key Flashes) (continued)
5-9
The screen illustrating the method for the disposal action will be displayed.
HINT
See p. 5-6 to p. 5-7 for details on clearing procedure.
3. Follow the procedure on the screen to remove misfed paper.
When all procedures are completed, the Basic Screen will be restored.
FOR DETAILS
JAM JOB has changed to STOP, and the settings for the current print-
ing job are displayed on the screen.
4. Press [START].
The scan/print job will resume.
5. Touch FREE JOB to continue the reserve job setting.
WARNING
The drum unit generates high voltage.
To avoid bodily electrical shock, NEVER TOUCH the area.
CAUTION
The internal fixing unit is very hot.
To avoid getting burned, DO NOT TOUCH.
CAUTION
Be careful of removing staples stuck inside the machine so as
not to get injured.
CAUTION
DO NOT INSERT your finger into the two RADF hinge portions,
otherwise you may be injured.
Trouble-
shooting
Call for
Service
Preventive
Maintenance
Clearing
Mishandled
Paper
JAM Key
ADD PAPER
Key
Memory
Overflow
Power OFF/ON
Screen
Copying
Hints
To Next Page
Loading...
