Reversing Colour in Black and White Image (Reverse Image) (continued)
9-32
4. Enter the desired print quantity from the control panel keypad.
HINT
See p. 3-6 for details on setting print quantity.
5. Position original(s) FACE UP in the document feeder or FACE
DOWN on the platen glass.
HINT
For details on positioning originals, see p. 3-2 to p. 3-5.
6. Press [START].
CAUTION
When the finisher / shift tray / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied
sets as they exit; otherwise, mishandled paper will occur.
To Next Page
Loading...
