Requirements for Safe Use (continued)
1-9
Safety
Information
CAUTION: Transportation
Be sure to contact your service representative when moving or transporting
the machine. If you move the machine with the Hard disk drive or Memory
unit installed, machine trouble may be caused by vibration.
CAUTION: Installation Space
Allow sufficient space for facilitating copy operation, changing parts, and
periodic inspection. Especially leave an adequate space behind the machine
to let hot air out from the rear fan.
Please Be Reminded!
SF-101 Shift tray gradually goes down while printed materials output.
DO NOT allow any object to interfere with the operation of the tray on
the left side of the Shift tray, as any interference may cause damage to
the Shift tray.
480
1140
1620
Unit: mm
400
475
650
1525
1836
766
950
120
Konica 7255/7272
480
1140
1620
Unit: mm
400
490
100
400
650
1640
1836
766
950
120
Konica 7255/7272 + SF-101 Shift tray
To Next Page
Loading...
