[4] E.K.C. (Electronic Key Counter) Function Setting (continued)
13-19
When a password is duplicated:
The Password Duplication Screen will be displayed. Touch YES to re-enter
new password, or NO to create duplicate password.
NOTE:
If duplicate password is created, the number of copies will be counted
only for the EKC password with the smallest No. We recommend you
do not use duplicate EKC password.
When a name is duplicated:
The Name Duplication Screen will be displayed. Touch OK to re-enter new
name.
To Delete EKC Data:
(1) Touch c or d key on the right side of the list to highlight the EKC data to be
deleted, then touch Delete. The Delete Confirmation Screen will be
displayed.
(2) Touch YES to delete, or NO to cancel.
To Clear EKC Count:
(1) Touch c or d key on the right side of the list to highlight the desired EKC
data, then touch COUNT RESET. The Reset Confirmation Screen will be
displayed.
(2) Touch COPY/PRINTER to clear the copy/print count, SCANNER to clear
the scan count, or ALL to reset both counters of the selected EKC data.
Touch CANCEL to cancel this function.
Delete Confirmation Screen Reset Confirmation Screen
4 If other EKC setting changes are required, touch RETURN on the EKC Data
Edit Screen to return to the EKC Setting Menu Screen. Touch desired key, from
[1]~[3].
5 Touch RETURN to restore the Key Operator Mode Screen.
6 If no further changes are required, touch RETURN to restore the Basic Screen
to perform copying operations.
Key Operator
Mode
Non-Image
Area Erase
Scan
Transmission
HDD
Management
Centring
Adjustment
Timing
Adjustment
Background
Adjustment
Finisher
Adjustment
Side 2 Lens
Adjustment
Call Remote
Centre
Machine
Management
List Print
Memory
Switch
Power Save
Setting
Tray Auto
Select Setting
Control Panel
Adjustment
Weekly
Timer
Key Operator
Data Setting
Panel Contrast/
Key Sound
Paper Type/
Special Size
Lock/Delete
Job Memory
E.K.C.
User Setting
Mode
Copier Initial
Setting
System Initial
Setting
Key Operator
Mode
To Next Page
Loading...
