Korg M3 Parameter Guide

Sequencer mode
294
3. In From Measure, specify the first measure in the copy
source song. In To End of Measure, specify the last
measure.
4. In To Song, specify the song into which the data will be
converted.
If you select a new song, a dialog box will ask you for
confirmation. Press the OK button to create a new song and
copy the data to that song.
If you select an existing song that already contains settings
and/or musical data, executing this command will erase the
data of that song and rewrite it with the data from the copy
source. Before you execute, be sure that you will not be
losing important data.
5. If you check Replace to original Song in Cue List and
execute this command, the Current Step song will be
replaced by the newly created song.
If you execute without checking this box, the newly created
song can be selected later for the desired step of the cue list.
6. To execute the Copy Song operation, press the OK but-
ton. To cancel, press the Cancel button.

Korg M3 Specifications

General

Synthesis Type	EDS (Enhanced Definition Synthesis)
Sound Engine	EDS (Enhanced Definition Synthesis)
MIDI	In, Out, Thru
Keyboard	61-key, velocity-sensitive, aftertouch
Sequencer	16-track MIDI sequencer
Sampling	Open Sampling System
Display	TouchView graphical user interface with 320x240 color TFT LCD
Arpeggiator	2 polyphonic arpeggiators
Controllers	Joystick, Ribbon Controller
Outputs	L/MONO, R, Individual 1-4, Headphones
USB	Yes, USB MIDI
Storage	SD card slot
Combinations	1, 792 user combinations
Polyphony	120 voices (max)
Effects	5 Insert effects, 2 Master effects, 1 Total effect