Global mode
386
Setup KARMA Ext. MIDI
(Setup KARMA External MIDI Routing)
When using the KARMA function in conjunction with an
external sequencer, you can execute this command with the
appropriate setting to automatically make settings for
Global mode Enable KARMA Module to MIDI Out,
Enable MIDI In to KARMA Module, and Local Control
On (Global 1–1a).
1. Select “Setup KARMA Ext. MIDI” to open the dialog
box.
2. Select the desired routing.
Send the output of KARMA to external device/sequencer
Choose this if you want the phrases generated by the M3’s
KARMA Module to be sent via MIDI to control your
external MIDI device or to be recorded on your external
MIDI sequencer.
Trigger KARMA generation from external device/
sequencer
Choose this if you want the KARMA Module to be triggered
by MIDI input from an external MIDI device or MIDI
sequencer.
You can also select this if you want only the M3’s keyboard
performance that triggers the KARMA Module to be sent as
MIDI output and recorded on an external sequencer, and
then use the echo-back or playback from the external
sequencer etc. to trigger the KARMA Module.
Both (note: possibility of MIDI feedback loop)
Choose this if you want to make both of the above settings.
Be aware that in some cases, the phrases generated by the
KARMA Module will pass through the external MIDI
device (MIDI sequencer) and re-trigger the KARMA Module
– producing a MIDI feedback loop that may cause undesired
operation. You will need to manage the MIDI signal routing
to ensure that MIDI feedback does not occur, for example by
disabling MIDI IN→OUT echo-back in your MIDI
sequencer.
3. Press the OK button to execute the Setup KARMA Ext.
MIDI command, or press the Cancel button to cancel.
Reset External Setup
This command initializes the external controller settings.
All settings for Switches 1–8, Sliders 1–8, and Pads 1–8 will
be initialized for the selected setup number.
Channel = Gch
Assign = Off
Pad Only Velocity = 127
1. Select the setup number “Setup” that you want to reset.
2. Select “Rename External Setup” to open the dialog box.
3. Press the OK button to execute Reset External Setup, or
press the Cancel button to cancel.
Rename External Setup
This lets you rename the external controller setup.
For more information, please see “Editing names” on
page 197 of the Operation Guide.
MIDI IN
MIDI IN
MIDI OUT
MIDI OUT
Local
control
OFF
ON
Tone
Generator
KARMA
MIDI Sequencer
(Echo back Off)
Recording
Enable
KARMA Module
to MIDI Out
Enable MIDI In
to KARMA Module
MIDI IN
MIDI IN
MIDI OUT
MIDI OUT
Local
control
OFF
ON
Tone
Generator
KARMA
MIDI Sequencer
Playback
Enable
KARMA Module
to MIDI Out
Enable MIDI In
to KARMA Module
MIDI IN
MIDI IN
MIDI OUT
MIDI OUT
Local
control
OFF
ON
Tone
Generator
KARMA
MIDI Sequencer
(Echo back On)
Recording
Enable
KARMA Module
to MIDI Out
Enable MIDI In
to KARMA Module
MIDI IN
MIDI IN
MIDI OUT
MIDI OUT
Local
control
OFF
ON
Tone
Generator
KARMA
MIDI Sequencer
Playback
Enable
KARMA Module
to MIDI Out
Enable MIDI In
to KARMA Module
To Next Page
Loading...
Need help?
General
