16
VOLUME While you are in the main pages of any
operating mode, select a track and use
these buttons to change the track’s vol
‐
ume.Use theleftbuttontodecreaseit,or
therightbuttontoincreas
eit.
MUTE Press both buttons in a pair to mute the
corresponding track. Press both buttons
again
tounmutethetrack.
SOLO While in the Style Play, Song Play
and Song mode
s, you can solo one of the
tracks. Jus
t keep the SHIFT button
pressed,andpress both oftheVOLUME/
VALUE buttons corresponding with the
trackyouwishtosolo.
Toexitthesolomode,keeptheSHIFTbut‐
ton pressed again, and press both the
VOLUME/VALUE buttons corresponding
tothesol
oedtrack.
VALU
E Useeachbutton pair tochangethe corre‐
sponding parameter’s value. The lef
t but‐
ton decreases the value, the right button
incr
easesit.
31 TRACK SELECT
Depending on the op
erating mode, this button
swi
tchesbetweenthevarioustracksview.
STYLEPLAYMODE
SwitchesbetweentheRealtimetracksand
theSt
yletracks.
SONGPLAYMODE
Switchesbetweenthemainpage(showing
the Realtime/Keyboard tracks), Song
trac
ks1–8,andSongtracks9–
16.
SONGMODE
Switches between the main page, Song
tracks1–
8andSongtracks9–16.
The TRACK SELECT LED shows the current page
view:
Off Main page (R
ealtime tracks, or Song con‐
trol
s)
On 2ndpage(Styletracks,orSongtracks1–8)
Flashing 3rdpage(Songtr
acks9–16)
32 SINGLE T
OUCH SETTING
(F-1–F-4 FUNCTION KEYS) buttons
While in the main page of the St
yle Play or Backing
Sequence mode, these buttons select a Single Touch
Settingeach.EachoftheStylesincludesamaximumof
fourSingleTouchSettings(STS),toautomaticallycon‐
figuretheRealtim
etracksand effectsatthe tou
chofa
finger.WhentheSINGLETOUCHLEDislit,anSTSis
automaticallysele ctedwhenselectingaStyle.
InEditmode,thesebuttonsdoubleasfunctionkeys,
toselectthecorrespondingitemsinthedisplay
.
33 SHIFT
Withthisbuttonhelddown,pressingcertainotherbut‐
to
nswillaccesstoasecondfunction.
34 TEMPO/VALUE se
ction
The DIAL and the DOWN/‐ and UP/+ buttons can be
used to control the Tem
po, assign a different value to
theselectedparameter in the displayor scroll a list of
files in the Song Select and Card pages. The VALUE
LEDshowsthestatusofthissection.
DIAL Turn the dial clockwise to increase the
valueortempo.Tu
rnitcounter‐clockwise
todecreasethevalueortempo.
When used while pressi
ng the
SHIFTbutton,thiscontrolalwaysactsasa
Te
mpocontrol.
DOWN/‐andUP/+
DOWN/‐ decreases the value or tempo;
UP/+increase
sthevalueortempo.
Keep the SHIFT button pressed
down,andpresseithertheDOWN/‐or
UP
/+ button to reset the Te
mpo to the
val
uethat’ssavedontotheselectedStyle.
35 VALUE LED
This LED shows the st
atus of the DIAL and DOWN/‐
andUP/+buttons.
ON
TheDIALandDOWN/‐andUP/+buttons
actas Value controls,
to change the value
oftheselectedparameterinthedisplay.
OFF TheDIALandDOWN/‐andUP/+buttons
controltheTempo.
36
EXIT/NO
Use thi
s button to perform var
ious actions, leaving
fromthecurrentstatus:
•exitadialogbox
•ans
wer “No” to any question that appears in the
display
•exi
ttheMenuwindow
•gobacktothemainpageofthe currentoperating
mode
•ex
itthe Globalor Card Editenvironment,andgo
back to the main page of the cur
rent operating
mode
•exi
t from a Style, Performance or Program Select
window
37 ENTER/YES
Use thi
s button
to perform variou
s actions, agreeing
thecurrentselectedstatus:
•answer “Yes” to any question that appears in the
display
•
confirmacommand
38 DISPLAY HOLD
ThisbuttonturnstheDisplay
Holdfunctiononoroff.
ON Whenyouopenatemporarywindow(like
theProg
ramSelectwindow),itremainsin
the display until you press EXIT/NO, or
anoperatingmodebutton.
OFF Anytemporarywindowclosesafter acer‐
tai
ntime,or afterselecting anit
emin the
window.
To Next Page
Loading...
Need help?
General
