8-12 824 Reference Manual 9/29/09
After selecting the template you can modify it as explained
in "Printing a Custom Report" on page 8-23.
Tailored Report Template (SSA instrument)
Report Settings
Lower Level
Report Settings Description
Unformatted [No] A dump of all Read, Query and Interval remote commands. Multiple values
are comma delimited.
Data Report [Yes] This shows general information such as Leq, SEL, Dose, Projected Dose, Lmin,
Lmax, Peak, Ln’s, exceedance, and calibration logs.
Setup Report [Yes] Print the settings and their values for the SSA instrument.
Intv Report [Short] Leq, SEL, Lmin, Lmax, Peak, Uwpk, exceedances, time, date, and duration in
the short report. The Long reports adds the Ln values and Spectral LNs for the
Interval period.
Hist Report [No] Leq for each time history period.
Print Range Intv Report [Short] You can customize the interval report by choosing the long or short report.
Lowest Record (00000) Selects the lowest interval record to be printed.
Highest Record (65535) Selects the highest interval record to be printed
Hist Report [No] You can customize the time history report by choosing the long or short report.
Lowest Record (00000) Selects the lowest interval record to be printed.
Highest Record (>99999) Selects the highest interval record to be printed
Histograms SPL Histogram [No] Prints SPL histogram and overall Spectral LN report.
Lowest Level (045) Selects the lowest SPL histogram level to be printed.
Highest Level (095) Selects the highest SPL histogram level to be printed.
Resolution (5.0) Selects the SPL histogram resolution
Pk-1 Histogram [No] You can customize the Peak1 Histogram report by choosing the long or short
report.
To Next Page
Loading...
Need help?
General
