9/29/09 Printing a Report 8-13
Histograms Lowest Level (110) Selects the lowest Peak1 histogram level to be printed.
Highest Level (140) Selects the highest Peak1 histogram level to be printed.
Resolution (5.0) Selects the Peak1 histogram resolution
Pk-2 Histogram [No] You can customize the Peak2 Histogram report by choosing the long or short
report.
Lowest Level (070) Selects the lowest Peak2 histogram level to be printed.
Highest Level (120) Selects the highest Peak2 histogram level to be printed.
Resolution (5.0) Selects the Peak2 histogram resolution
Tailored Report Template (LOG instrument)
Report Settings
Lower Level
Report Settings Description
Unformatted [No] A dump of all Read, Query and Interval remote commands.
Multiple values are comma delimited.
Data Report [Yes] This shows general information such as Leq, SEL, Dose, Projected Dose, Lmin,
Lmax, Peak, Ln’s, exceedance, and calibration logs.
Log Report [Yes] The run/stop log and with the date and time of each run/stop.
Setup Report [No] Print the settings and their values for the LOG instrument.
SPL Histogram [No] The 6 Ln values, Lmax, Lmin, and a bargraph of the level distribution.
Intv Report [Short] Leq, SEL, Lmin, Lmax, Peak, Uwpk, exceedances, time, date, and duration in
the short report. The Long reports adds the Ln values for the Interval period.
Hist Report [Yes] Leq for each time history period.
Excd Report[Short] Lists number of Record, Exchange Rate, Minimum Duration Time, Period,
Mode, Start Time, Leq, Max, Peak, Overloads, Unweighted Peak, Duration,
SEL, and Spectrum.
Daily Report[Short] Lists date, duration, Leq, Peak, Unweighted Peak, Ldn, Lmax, CNEL, and
Lmin.
Tailored Report Template (SSA instrument)
To Next Page
Loading...
Need help?
General
