Lenze i950

Address Name / seng range / [default seng] Info
0x2870:002 SafetyInterface: SafetyInterface State
•
R
ead only
Bit 0 SLS1 monitored
Bit 1 SLS2 monitored
Bit 2 SLS3 monitored
Bit 3 SLS4 monitored
Bit 4 SMS monitored
Bit 5 SSM within limits
Bit 6 SDI posive monitored
Bit 7 SDI negave monitored
Bit 8 SLP1 monitored
Bit 9 SLP2 monitored
Bit 10 SLP3 monitored
Bit 11 SLP4 monitored
Bit 12 SCA1 within limits
Bit 13 SCA2 within limits
Bit 14 SCA3 within limits
Bit 15 SCA4 within limits
Bit 16 PDSS posive monitored
Bit 17 PDSS negave monitored
Bit 18 SOS monitored
Bit 19 SBC acve
Bit 20 SHOM acve
Bit 21 SHOM available
Bit 22 Sichere velocity OK
Bit 23 Speed = 0
Bit 24 Posive travel direcon
Bit 25 Slip > 25 %
Bit 26 Slip > 50 %
Bit 27 Slip > 75%
Bit 31 Fault acve
Safety
funcons
Connecon to the applicaons
Status signals
446